Tomato Settings

QOS

  • Navigate to QOS, then Basic Settings
  • Check Enable QOS
  • Set the maximum inbound and outbound bandwidth based on a per-location basis
  • Default values for rate limits are usually fine.
  • Navigate to Classification
  • Add new rules for SIP and RTP
    • SIP

      • Select Protocol: UDP
      • Select Src or Dst port: 5060
      • Select Class: Highest
      • Enter description: SIP
      • Click OK
    •  RTP

      • Select Protocol: UDP
      • Select Src or Dst port: 10000-20000
      • Select Class: Highest
      • Enter description: RTP
      • Click OK

Port Forwards

  • Navigate to Port Forwarding, then Basic
  • Select Protocol: Both
  • Leave Src Address blank
  • Enter Ext Port 65000
  • Enter Int Port 443
  • Enter Int. Address of the device you are connecting to
  • (Optional) Enter description